REGARD 7000 4-20 mA input module w/ HART

8327250

The REGARD 7000 4-20 mA Input Module c/w HART serves as power supply and for evaluating any connected 4-20 mA transmitters with HART functionalities. The configuration of full scale deflection, target gas name and measurement unit is carried out semi-automatically through the transmitter settings or manually. Additionally, command 48 of the HART protocol is used to receive diagnostic information from the transmitter. By using the universal FGDS transmitter software PolySoft it is possible to remotely correct the transmitter configuration via the HART tunnel provided by the REGARD 7000. If the configuration of the connected transmitter or the REGARD 7000 is changed during operation, there will be a mismatching warning. Technical data: - Number of input channels: max. 8 - Operating voltage: 24 V (18 to 30 V) via Docking Station - Transmitter supply voltage: typically 24 V, depending on the supply voltage of the Docking Station. - Transmitter supply current: - Max. 500 mA per channel - Overall transmitter supply current max. 2 A - Supported HART transmitters: Polytron 7x00, PIR 7x00, Polytron 8xx0 - Signal input current range: 0 to 24 mA (short-circuit detection at 38 mA) - Input resistance: 262 Ohm - Measurement accuracy: ± 0.05 mA ±0.002 mA/K [0 ... 4 mA] ± 1.25 % ± 0.05 %/K [4 ... 24 mA] - Power input: max. 2.1 A - Power loss: max. 5 W at 24 V - Temperature (during operation): 0 ... 50 °C - Temperature (in storage): -20 ... +60 °C - Humidity (during operation): 20 ... 90 % r.h., non-condensing - Humidity (in storage): 5 ... 90 % r.h., non-condensing - Pressure: 700 ... 1300 hPa - Height: max. 3000 m above sea level - Complies with the requirements of the electromagnetic compliance according to EN 50270:2015 (type 2) - Dimensions and weight [H x W x D] [110 x 46 x 130] [mm] [265] [g]